GENERAL QUESTIONS

What do I need to consider when buying marble or granite?
Because it is a natural stone, marble-and more recently granite-has been blessed with a remarkable natural beauty that has captivated humans throughout the ages. Inherent in such natural products is a certain lack of predictability that sophisticated architects and designers celebrate. Consumers who are less acquainted with the material expect the marble ordered to be identical to the picture or sample they were shown. Although sample stones are intended to be representative of the quarry's product, the material quarried at one time may differ slightly in color an veining from the sample. Moreover, even a single marble or granite slab will possess a certain amount of color variation from one end to the other. Interior designers and architects have come to view this tendency of natural stone as an advantage. Slight irregularities can be pleasing, introducing an element of the natural into human-designed spaces, whether residential or commercial.

What's the difference between marble and granite?
Although both are stones and both are quarried from the earth, granite and marble (and marble’s relatives – limestone, onyx and travertine) are very different from each other. Granite is formed deep in the earth’s mantle at extremely high temperatures, and is a very hard, resistant stone made of crystallized minerals. The marble family – limestone, travertine, marble, onyx – starts out as sediment – animal skeletons and shells, plant matter, silt – at the bottom of bodies of water. After millions of years this solidifies (lithifies) into stone. Because its main component is calcium, it can be affected by acids such as vinegar and citrus beverages.

Should I use marble or granite for my kitchen countertops?
Although typical application of marble is for the bathroom vanity tops, Jacuzzi tops and fireplaces, it is possible to use it in the kitchen. However, due to the fact that it is easy to scratch and is affected by acidic substances, such as vinegars, ketchups etc, we don’t usually recommend it. Moreover the high-gloss of the marble countertop can be partially lost as many chemicals etch its surface. Granite in turn is considered the second hardest stone, its polish is not subject to etching by household acids, or scratching by knives and pots and pans under normal use. It is also not affected by typical kitchen heat such as hot pans.

Is it necessary to seal stone?
Since mineral surfaces are quite porous they absorb liquids, which may result in discoloring and staining. Although there are many commercial grade products available on the market which may bring the stone to its to its original luster, taking simple precautions and regular maintenance can save a lot of trouble and cost. All marble an granite tops are sealed immediately after they are installed. The impregnating substance penetrates the stone clogging most of its pores making its quite impervious to alcohol, juices, soft drinks, cosmetics, cleaners, coffee, food and even oil. With course of time, depending on how heavily the tops are used, the sealer gets washed out. The clear indication of this happening would be the fact that the liquids are easily absorbed into the stone leaving temporary (if promptly wiped off) stains.

Do I have to buy the whole sheet/slab?
Slabs are always sold intact. Buying random slabs is similar to buying fabric. Like a seamstress or tailor, your fabricator buys the raw material and sells you a completed installation. In the price is included the cost of transporting the material, making field measurements and templates, cutting, polishing, bringing the pieces to your job site and fitting them into place. How much material he needs is determined by the layout and the amount of waste. The fabricator will lay out your job in a way that will minimize the amount of waste material while maximizing the natural beauty of veining and pattern.

How do I deal with sink and stove cutouts?
With our water jet technology we have the ability to cut any sink or surface unit cutout with computer aided design files. Undermount sinks (sinks that are mounted under that countertop so as not to show any rim) are fully cut out, then the inside of the hole is polished. The countertop is then flipped over and fitted with special grommets for your plumber to fasten the sink. Self rimming cutouts are cut 6" into each corner leaving some of the straight section to be cut in the field to facilitate safe shipping.

Are granite countertops sanitary?
Once upon a time . . there was a report circulating that granite countertops were unsafe, harbor bacteria and can produce disease. This is absolutely FALSE, NIOSH and the CDC have no reports of granite or any other stone used as a countertop as being unsanitary. These rumors are circulated by the Solid Surface Industry in an attempt to compete with the Stone Industry.